-40%
Seco-Larm Enforcer IR Reflective Photoelectric Sensor, 50 ft. (E-931-S50RRGQ)
$ 43.92
- Description
- Size Guide
Description
Monitor your garage, gate, driveway or doorway with the Seco-Larm Enforcer Photoelectric Beam Sensor (50 ft.). This weatherproof sensor triggers an alarm in a connected security system when its infrared (IR) beam is broken. The 3-inch round reflector can be installed discretely on a wall or other flat surface. It provides a large sensing area for wide entryways, as well as easier alignment during installation. This sensor also features lensed optics and dual-color LEDs to strengthen the beam and minimize false alarms due to rain, snow, falling leaves, birds, etc.Up to 50-foot sensing range (sensor to reflector)
Suitable for indoor or outdoor use
Weatherproof with sunlight-filtering case
Near immediate response time from 10ms
Mounting hardware included
Contents
Sensor
Reflector
Mounting Bracket
Sensor Hood
(4) Cover Screws
(2) Mounting Screws
Reflector Mounting Screw
Rubber Ring
Cable Connector
Manual
Removable Terminal Block
10KΩ Resistor
Technical Details
Manufacturer Part #:
E-931-S50RRGQ
UPC:
676544017295
Type:
Reflective photoelectric beam sensor
Sensing Range:
Up to 50 feet (15m)
Operating Voltage:
12~30DC/ADC, 100mA
Current Draw:
Standby:55mA at 12VDC Active:40mA@12VDC
Response Time:
10ms
Light Source:
IR LED
LEDs:
Solid Red: No beam signal, triggered
Alternating Flash: Poor beam signal
Solid Green: Good beam signal, properly aligned
Alarm Output:
NO/NC relay, 0.5A at 120VAC, min. 1s
Tamper Switch:
NC switch, 500mA at 30VAC/VDC
Alignment Angle:
Horizontal: ±90 degrees; Vertical: ±15 degrees
Enclosure:
Weatherproof IP55
Operating Temperature:
-13° to 131°F (-25° to 60°C)
Dimensions:
3-3/16 x 7-3/16 x 3-9/16 inches (81 x 182 x 91 mm)
Weight:
Sensor: 11.6 ounces (329g) with hood
Reflector: 5.9 ounces (167g) with hood
Approvals:
ISO 9001, CE, RoHS
Warranty:
1 Year